Inleiding

This guide is for if you conclude that your difficulty with braking is due to your brake cables being too loose.

Onderdelen

Geen onderdelen nodig.

Loosen the bolt that clamps the brake cable on the brake caliper with the 10mm open-end wrench.
  • Loosen the bolt that clamps the brake cable on the brake caliper with the 10mm open-end wrench.

Voeg opmerking toe

Pull the brake cable until proper tension is acquired and the cable shows resistance.
  • Pull the brake cable until proper tension is acquired and the cable shows resistance.

Voeg opmerking toe

Re-tighten the clamping nut.
  • Re-tighten the clamping nut.

Voeg opmerking toe

If necessary, adjust the positioning of the caliper arms by loosening the dome nut at the pivot point and manually shifting the arms in the desired direction.
  • If necessary, adjust the positioning of the caliper arms by loosening the dome nut at the pivot point and manually shifting the arms in the desired direction.

Voeg opmerking toe

For more precise adjustment of the brake cable tension, use pliers to tighten the barrel nut at the opposite ends of the handlebars on the brake levers.
  • For more precise adjustment of the brake cable tension, use pliers to tighten the barrel nut at the opposite ends of the handlebars on the brake levers.

Voeg opmerking toe

Conclusie

Your brakes should be fully tightened now.

5 andere personen hebben deze handleiding voltooid.

Samantha Rawlins

Lid sinds: 21-01-14

386 reputatie

3 handleidingen geschreven

Team

Cal Poly, Team 1-40, Maness Winter 2014 Lid van Cal Poly, Team 1-40, Maness Winter 2014

CPSU-MANESS-W14S1G40

4 Leden

5 handleidingen geschreven

Één commentaar

Thank God I didn’t have to watch someone's long winded 10 minute video explaining this.  lol Thank you for that!  Great article.  Thanks for helping me out!

rtinmotion - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 5

Afgelopen 30 Dagen: 22

Altijd: 1,708