Inleiding

This guide describes how to replace the hard drive.

Onderdelen

Geen onderdelen nodig.

Unscrew the five 0.31 inch T-9 screws on the back cover.
  • Unscrew the five 0.31 inch T-9 screws on the back cover.

Voeg opmerking toe

Slide the cover towards the back until it is no longer under the front cover.
  • Slide the cover towards the back until it is no longer under the front cover.

Voeg opmerking toe

Lift the cover up and off the device.
  • Lift the cover up and off the device.

Voeg opmerking toe

Locate the hard drive.
  • Locate the hard drive.

Voeg opmerking toe

Remove the ribbon cable by applying firm pressure to the black tabs on the sides. Remove the power cable to the right of the ribbon cable.
  • Remove the ribbon cable by applying firm pressure to the black tabs on the sides.

  • Remove the power cable to the right of the ribbon cable.

Voeg opmerking toe

Unscrew the 0.31 inch T-9 screws from the hard drive and pull outwards to remove. Unscrew the 0.31 inch T-9 screws from the hard drive and pull outwards to remove. Unscrew the 0.31 inch T-9 screws from the hard drive and pull outwards to remove.
  • Unscrew the 0.31 inch T-9 screws from the hard drive and pull outwards to remove.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Talha

Lid sinds: 11-10-11

31 Reputatie

2 handleidingen geschreven

Team

Cal Poly, Team 5-33, Amido Fall 2011 Lid van Cal Poly, Team 5-33, Amido Fall 2011

CPSU-AMIDO-F11S5G33

4 Leden

7 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 1

Afgelopen 7 Dagen: 2

Afgelopen 30 Dagen: 9

Altijd: 1,438