Ga door naar hoofdinhoud

ThinkPad X1 Carbon Wireless Card Replacement

Wat je nodig hebt

  1. ThinkPad X1 Carbon Wireless Card Replacement, Loosen Cover Screws: stap 1, afbeelding 1 van 1
    • Using the #0 Phillips screwdriver, loosen the seven cover screws. they will not come all of the way out.

  2. ThinkPad X1 Carbon Wireless Card Replacement: stap 2, afbeelding 1 van 1
    • Using the spudger pop the cover loose and remove.

  3. ThinkPad X1 Carbon Wireless Card Replacement, Disconnect Battery: stap 3, afbeelding 1 van 1
    • Use only plastic tools to disconnect battery cable

    • Slide battery connector in the direction if the arrow to disconnect.

    • You can leave the battery or remove it using the red circles for the screw locations.

  4. ThinkPad X1 Carbon Wireless Card Replacement: stap 4, afbeelding 1 van 1
    • Remove screw holding the wireless card in place.

  5. ThinkPad X1 Carbon Wireless Card Replacement, Remove Antenna Cables: stap 5, afbeelding 1 van 1
    • Carefully remove the antenna cables and slide out the card in the direction of the arrow.

    • The gray connector is on the top. The black connector is closer to the battery.

Conclusie

To reassemble your device, follow these instructions in reverse order.

3 andere personen hebben deze handleiding voltooid.

Mike

Lid sinds: 06/23/16

1.834 Reputatie

5 handleidingen geschreven

Team

iReconstruction Lid van iReconstruction

Business

1 Lid

11 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 10

Afgelopen 30 dagen: 43

Altijd: 5,387