Repareer je spullen Gemeenschap Winkel

Teac DC-D2831 Motor Replacement

Inleiding

If you have identified that your record player needs to have its motor replaced, this guide will show you how to safely do so. The motor is what controls the speed the record plays at, and may wear down or completely fail over time and with use. Replacement is easy if these steps are followed. Note that it is first important to complete the Disassembly Guide.

Wat je nodig hebt

  1. Teac DC-D2831 Motor Replacement, Motor: stap 1, afbeelding 1 van 2 Teac DC-D2831 Motor Replacement, Motor: stap 1, afbeelding 2 van 2

    • Remove the three brass screws using a phillips #1 screwdriver.

    Bewerken

  2. Teac DC-D2831 Motor Replacement: stap 2, afbeelding 1 van 1

    • Cut the wires that are attached to the motor.

    • Be sure to note the attachment point so that the wires can be reattached to the new motor.

    Bewerken

  4. Teac DC-D2831 Motor Replacement: stap 3, afbeelding 1 van 3 Teac DC-D2831 Motor Replacement: stap 3, afbeelding 2 van 3 Teac DC-D2831 Motor Replacement: stap 3, afbeelding 3 van 3

    • Using the phillips #1 screwdriver, remove the three screws that are holding the circular mounting bracket to the motor.

    • Remove the circular mounting bracket from the motor.

    Bewerken

  5. Teac DC-D2831 Motor Replacement: stap 4, afbeelding 1 van 2 Teac DC-D2831 Motor Replacement: stap 4, afbeelding 2 van 2

    • Attach the mounting bracket to the new motor.

    • Insert the new motor.

    • Flip the turntable over making sure the motor stays in place, and insert the screws underneath the turntable.

    Bewerken

  6. Teac DC-D2831 Motor Replacement: stap 5, afbeelding 1 van 1

    • The ends of the wires will need to be stripped before soldering.

    • Be extremely careful not to burn yourself while soldering.

    • Solder the wires cut wires onto the motor in the location recorded previously.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order and complete the disassembly guide in reverse order.

Auteur

met 5 andere bijdragers

Jake Hamilton

Lid sinds: 09/19/12

167 Reputatie

2 handleidingen geschreven

Medailles: 11

+8 andere badges

Team

Cal Poly, Team 2-61, Propen Fall 2012 Lid van Cal Poly, Team 2-61, Propen Fall 2012

CPSU-PROPEN-F12S2G61

4 Leden

5 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 4

Altijd: 1,796