Inleiding

Removing the TRS-80 Color Computer's motherboard.

Onderdelen

Geen onderdelen nodig.

Flip the computer over.
  • Flip the computer over.

  • Remove the two 24.1mm Phillips screws near the front of the case.

  • Remove the five 33.0 mm Phillips screws towards the back of the case.

Voeg opmerking toe

Carefully flip the computer right side up.
  • Carefully flip the computer right side up.

  • Lift off the top half of the case.

Voeg opmerking toe

  • Near the motherboard, gently pull the keyboard ribbon cable until it becomes free.

  • Lift the keyboard out of the case.

Voeg opmerking toe

  • Remove the nine 15.24 mm Phillips screws securing the motherboard in place.

  • When removing the spring door, make sure to keep the door closed.

Voeg opmerking toe

  • Remove the 5 jumper cables from the motherboard.

  • Once the jumper cables lift the motherboard up gently; it should lift out easily.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Andrew

Lid sinds: 23-01-11

442 Reputatie

2 handleidingen geschreven

Team

Cal Poly, Team 11-24, Maness Winter 2011 Lid van Cal Poly, Team 11-24, Maness Winter 2011

CPSU-MANESS-W11S11G24

4 Leden

5 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 2

Afgelopen 7 Dagen: 4

Afgelopen 30 Dagen: 18

Altijd: 2,925