Ga door naar hoofdinhoud

TCA Quadrant Flash and re-install the firmware

Wat je nodig hebt

    • Download and install the driver package from here.

    • Both the Sidestick and the Quadrant are using the same driver.

    • Press on the Windows button and type "Firmware Update" into the search.

    • Unplug your Quadrant from USB if you already have it plugged-in

  1. TCA Quadrant Flash and re-install the firmware, Press and hold the indicated button.: stap 4, afbeelding 1 van 1
    • Press and hold the button highlighted in the image.

    • Keep holding the button and connect the Quadrant directly to USB port of your PC.

    • Connection must go directly to USB port of your PC and not through the Sidestick

    • Your Quadrant should show up in Firmware Updater.

    • Press OK on the Firmware Updater and wait for update to complete.

Eindstreep

Formica Fusca

Lid sinds: 08/01/24

2.595 Reputatie

15 handleidingen geschreven

0Gids Commentaar

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 14

Afgelopen 30 dagen: 40

Altijd: 369