Ga door naar hoofdinhoud

Swann Doorphone Video Intercom Wire Replacement

Wat je nodig hebt

  1. Swann Doorphone Video Intercom Wire Replacement, Wire: stap 1, afbeelding 1 van 3 Swann Doorphone Video Intercom Wire Replacement, Wire: stap 1, afbeelding 2 van 3 Swann Doorphone Video Intercom Wire Replacement, Wire: stap 1, afbeelding 3 van 3
    • Flip the monitor of the Swann Doorphone over so that the underside is facing up.

    • Grip the sides of the black rectangular frame where they extend outwards and pull down.

    • After pulling down, pull the frame towards you to remove it from the monitor.

  2. Swann Doorphone Video Intercom Wire Replacement: stap 2, afbeelding 1 van 3 Swann Doorphone Video Intercom Wire Replacement: stap 2, afbeelding 2 van 3 Swann Doorphone Video Intercom Wire Replacement: stap 2, afbeelding 3 van 3
    • Using the JIS #0 screwdriver, unscrew the 2 mm screw in terminal 1 with the blue wire underneath.

    • Pull the blue wire out from beneath the metal plate.

    • Be careful when removing the screw from terminal 1, the metal plate behind the screw is not connected and may fall off.

  3. Swann Doorphone Video Intercom Wire Replacement: stap 3, afbeelding 1 van 3 Swann Doorphone Video Intercom Wire Replacement: stap 3, afbeelding 2 van 3 Swann Doorphone Video Intercom Wire Replacement: stap 3, afbeelding 3 van 3
    • Flip the outdoor camera over so that the underside is facing up.

    • Remove the back cover by grabbing the sides of the camera and pulling towards your body.

  4. Swann Doorphone Video Intercom Wire Replacement: stap 4, afbeelding 1 van 3 Swann Doorphone Video Intercom Wire Replacement: stap 4, afbeelding 2 van 3 Swann Doorphone Video Intercom Wire Replacement: stap 4, afbeelding 3 van 3
    • With the back cover of the outdoor camera off, press the first gray square button with blue wire down.

    • While pressing the gray square button, remove the blue wire from the first opening under the button.

    • Be sure to remove the same color wire for the outdoor camera as was used for the indoor video intercom.

    • In this guide, we are using the blue wire in terminal 1 for the audio. As a recommendation; * Use the blue wire in terminal 1 for the audio wire. * Use the brown wire in terminal 2 for the ground wire. * Use the green wire in terminal 3 for the video wire. * Use the black wire in terminal 4 for the power wire.

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Emily Stenke

Lid sinds: 02/14/18

555 Reputatie

4 handleidingen geschreven

Team

USF Tampa, Team S2-G4, Eyestone Spring 2018 Lid van USF Tampa, Team S2-G4, Eyestone Spring 2018

USFT-EYESTONE-S18S2G4

4 Leden

5 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 3

Afgelopen 7 dagen: 6

Afgelopen 30 dagen: 13

Altijd: 1,714