Repareer je spullen Gemeenschap Winkel

Suzuki FA50 Moped Exhaust Pipe Replacement

Inleiding

Use this guide to remove the exhaust pipe from your Suzuki FA50 moped.

Wat je nodig hebt

  1. Suzuki FA50 Moped Exhaust Pipe Replacement, Exhaust Pipe: stap 1, afbeelding 1 van 1

    • Use a #2 Phillips screwdriver to remove the heat shield from the muffler.

    Bewerken

  3. Suzuki FA50 Moped Exhaust Pipe Replacement: stap 2, afbeelding 1 van 1

    • There are two 10 mm hex nuts attaching the muffler to the engine. Make sure you remove both of them before proceeding to the next step.

    • Use a 10 mm socket wrench to unscrew the two hex nuts.

    Bewerken

  4. Suzuki FA50 Moped Exhaust Pipe Replacement: stap 3, afbeelding 1 van 1

    • Use a 12 mm socket wrench to unscrew the third and final hex nut that holds the muffler in place.

    • Make sure to support the muffler with your hand while removing this nut, otherwise it may just fall to the floor.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Één opmerking

Thanks you very much! Happy Fourth of July.

D4Tay - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 3

Afgelopen 30 dagen: 9

Altijd: 6,783