Ga door naar hoofdinhoud
Supply Tube

Supply Tube

Ron Davis

Ron Davis en 2 andere bijdragers

Voor het laatst geüpdatet op July 1, 2020

5 minuten
Eenvoudig
Alleen vereisten
Deze handleiding is alleen bedoeld als vereiste voor andere handleidingen. Het staat niet op zichzelf.

Prereq-only guide for disconnecting the supply tube from a gravity flush toilet.

  1. Supply Tube, Shutting off the Water Supply to a Toilet: stap 1, afbeelding 1 van 2 Supply Tube, Shutting off the Water Supply to a Toilet: stap 1, afbeelding 2 van 2
    • Shut off the stop valve underneath the toilet by turning it clockwise until it becomes hand tight.

    • The appearance of this valve may differ from toilet to toilet, but most operate the same. Some valves require multiple turns to stop the water while others only require a quarter turn.

  2. Supply Tube, Supply Tube: stap 2, afbeelding 1 van 3 Supply Tube, Supply Tube: stap 2, afbeelding 2 van 3 Supply Tube, Supply Tube: stap 2, afbeelding 3 van 3
    • Place a bucket under the supply tube to catch any dripping water.

    • Turn the coupling nut on the supply tube clockwise until it releases from the threaded shank on the bottom of the tank.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Ron Davis

Lid sinds: 02/17/15

32.132 Reputatie

13 handleidingen geschreven

0Gids Commentaar

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 160