Ga door naar hoofdinhoud

Starbucks Barista Steam Wand replacement or cleaning

Wat je nodig hebt

  1. Starbucks Barista Steam Wand replacement or cleaning, steam wand: stap 1, afbeelding 1 van 1
    • Using a wrench, unscrew the hex nut and remove the steam wand.

    • Note: Do not lose the hex nut once it is unscrewed.

  2. Starbucks Barista Steam Wand replacement or cleaning: stap 2, afbeelding 1 van 2 Starbucks Barista Steam Wand replacement or cleaning: stap 2, afbeelding 2 van 2
    • Using a thin tool or item, such as a paper clip, poke around through the holes on both ends of the wand to remove any foreign material.

    • Place the steam wand in a de-calcifying solution as directed by product.

    • Reconnect the steam wand.

    • See the links section of the device page to purchase a new steam wand.

Conclusie

To reassemble your device, follow these instructions in reverse order.

4 andere personen hebben deze handleiding voltooid.

David

Lid sinds: 01/28/11

748 Reputatie

3 handleidingen geschreven

Team

Cal Poly, Team 4-42, Regan Winter 2011 Lid van Cal Poly, Team 4-42, Regan Winter 2011

CPSU-REGAN-W11S4G42

4 Leden

5 handleidingen geschreven

Één opmerking

To replace steam-wand seals (in case of water leaking out from the center of the steam-wand): https://www.youtube.com/watch?v=fulyy9A9... , but note - for parts: https://philips.encompass.com/model/SAER... (worth going to amazon.de and entering the partnumbers into the search box: e.g. the o-rings for the needle-valve (996530013462)

R Cly - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 5

Afgelopen 30 dagen: 40

Altijd: 15,894