Inleiding

This is the replace guide for Sony Xperia Z3 Dual and Sony Xperia Z3 headphone jack. But your phone may be not waterproof after DIY headphone jack replacement.

Power off the phone and remove two SIM card trays before headphone jack replacement.
  • Power off the phone and remove two SIM card trays before headphone jack replacement.

Voeg opmerking toe

Heat to soften back cover adhesive sticker. Use suction cup to open a gap and insert into the guitar pick. Slide the guitar pick to cut the sticker all around every side.
  • Heat to soften back cover adhesive sticker.

  • Use suction cup to open a gap and insert into the guitar pick.

  • Slide the guitar pick to cut the sticker all around every side.

Voeg opmerking toe

Remove back cover.
  • Remove back cover.

Voeg opmerking toe

Remove battery easily. Remove battery easily. Remove battery easily.
  • Remove battery easily.

Voeg opmerking toe

Twist off two screws by Philips screwdriver at first.
  • Twist off two screws by Philips screwdriver at first.

Voeg opmerking toe

Remove three pieces of securing bracket. Remove three pieces of securing bracket. Remove three pieces of securing bracket.
  • Remove three pieces of securing bracket.

Voeg opmerking toe

Release all the connectors connecting with motherboard. Pry it up from left side. Please be careful with some hidden keys, they held the motherboard really tightly. Pry it up from left side. Please be careful with some hidden keys, they held the motherboard really tightly.
  • Release all the connectors connecting with motherboard.

  • Pry it up from left side. Please be careful with some hidden keys, they held the motherboard really tightly.

Voeg opmerking toe

Remove securing cover beside headphone jack. Remove securing cover beside headphone jack.
  • Remove securing cover beside headphone jack.

Voeg opmerking toe

Remove the flex cover on the headphone jack. It's a part of the assembly and comes with denoise MIC and sensors. Cut the adhesive sticker between headphone jack and midframe. Remove headphone jack finally.
  • Remove the flex cover on the headphone jack. It's a part of the assembly and comes with denoise MIC and sensors.

  • Cut the adhesive sticker between headphone jack and midframe.

  • Remove headphone jack finally.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

4 andere personen hebben deze handleiding voltooid.

Sophia

Lid sinds: 25-03-14

38.963 reputatie

111 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 2

Afgelopen 7 Dagen: 14

Afgelopen 30 Dagen: 58

Altijd: 5,963