Inleiding

This is the replacement guide for Sony Xperia Z3 Dual as well as Sony Xperia Z3 front camera.

  1. Power off the phone and remove two SIM card trays before replacement.
    • Power off the phone and remove two SIM card trays before replacement.

  2. Heat to soften back cover adhesive sticker. Use suction cup to open a gap and insert into the guitar pick. Slide the guitar pick to cut the sticker. Use suction cup to open a gap and insert into the guitar pick. Slide the guitar pick to cut the sticker.
    • Heat to soften back cover adhesive sticker.

    • Use suction cup to open a gap and insert into the guitar pick. Slide the guitar pick to cut the sticker.

  3. Remove back cover carefully and avoid cracking the glass.
    • Remove back cover carefully and avoid cracking the glass.

  4. Gratis verzending van alle bestellingen van meer dan US$ 100 of met een Pro Tech Toolkit!

    Doorblader onze winkel
  5. Remove battery or not is optional. Remove it makes the replacement convenient while keep it also will not block the replacement. Remove battery or not is optional. Remove it makes the replacement convenient while keep it also will not block the replacement. Remove battery or not is optional. Remove it makes the replacement convenient while keep it also will not block the replacement.
    • Remove battery or not is optional. Remove it makes the replacement convenient while keep it also will not block the replacement.

  6. Remove screws at first.
    • Remove screws at first.

  7. Remove three pieces of securing bracket. Remove three pieces of securing bracket. Remove three pieces of securing bracket.
    • Remove three pieces of securing bracket.

  8. Release all the connectors connecting with motherboard. Pry the motherboard up from left side and remove it. The motherboard is hold tightly by some hidden keys, so you should be very careful. Pry the motherboard up from left side and remove it. The motherboard is hold tightly by some hidden keys, so you should be very careful.
    • Release all the connectors connecting with motherboard.

    • Pry the motherboard up from left side and remove it. The motherboard is hold tightly by some hidden keys, so you should be very careful.

  9. Release the connector and pull out the flex at first, please be careful as you can. Remove the front camera finally.
    • Release the connector and pull out the flex at first, please be careful as you can.

    • Remove the front camera finally.

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Sophia

Lid sinds: 25-03-14

41.565 Reputatie

62 handleidingen geschreven

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 2

Afgelopen 30 Dagen: 5

Altijd: 2,131