Inleiding

If your phone's motherboard needs to be replaced, this guide will assist you through the replacement steps.

  1. Set the phone screen down on a clean flat, surface.
    • Set the phone screen down on a clean flat, surface.

    • Insert the plastic opening tool into the groove located between the body of the phone, and the back plate protecting the battery.

    • Open the back of the device by prying around the sides of the back panel using the plastic opening tool.

    Voeg opmerking toe

  2. Insert the plastic opening tool in between the battery and the phone body.
    • Insert the plastic opening tool in between the battery and the phone body.

    • Pry up on the side of battery, and remove it.

    Voeg opmerking toe

    • Remove the bottom cover of the phone using the plastic opening tool.

    Voeg opmerking toe

    • Remove the five 5.47mm and one 5.18mm Torx head screws using a Phillips #0 screwdriver.

    Voeg opmerking toe

    • Carefully remove the back cover using the plastic opening tool.

    Voeg opmerking toe

    • Pry up on the right side of the motherboard using the plastic opening tool.

    Voeg opmerking toe

    • Carefully detach the flex cable using a pair of tweezers.

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

3 andere personen hebben deze handleiding voltooid.

Bader

Lid sinds: 07-10-14

545 Reputatie

4 handleidingen geschreven

Team

USF Tampa, Team 7-2, Leahy Fall 2014 Lid van USF Tampa, Team 7-2, Leahy Fall 2014

USFT-LEAHY-F14S7G2

4 Leden

5 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 3

Afgelopen 30 Dagen: 18

Altijd: 2,487