Inleiding

This guide can be used to replace the speaker on your phone.

  1. Using the spudger, pry open the back cover by starting alongside the edge of the back cover.
    • Using the spudger, pry open the back cover by starting alongside the edge of the back cover.

    Voeg opmerking toe

  2. Once the part of the back cover has been opened up. Slide the spudger to pry completely detach the cover from the phone.
    • Once the part of the back cover has been opened up. Slide the spudger to pry completely detach the cover from the phone.

    Voeg opmerking toe

  3. Gratis verzending op bestellingen van meer dan $20
    Gebruik code BLUEANDBLACK bij het afrekenen
    Gratis verzending op bestellingen van meer dan $20
    Gebruik code BLUEANDBLACK
    • Using the Phillips #00 Precision screwdriver, take out 8 silver screws (3.15mm) and 5 gold screws (3.9mm) for a total of all the screws attached to the flat plate. 3 of the gold screws are located at the top of the phone and the other 2 screws are located at the bottom of the phone.

    Voeg opmerking toe

    • To remove the internal cover, use the plastic spudger tool and pry the cover from the phone as shown in the picture.

    Voeg opmerking toe

    • Using the tweezer, pull out the speaker located on the inside of the back cover of the phone.

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

5 andere personen hebben deze handleiding voltooid.

Christina Wojaczyk

Lid sinds: 26-09-14

1.425 Reputatie

7 handleidingen geschreven

Team

USF Tampa, Team 13-3, Staggers Fall 2014 Lid van USF Tampa, Team 13-3, Staggers Fall 2014

USFT-STAGGERS-F14S13G3

3 Leden

7 handleidingen geschreven

Één commentaar

How to repair loudspeaker of t2 ultra

Azizah - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 6

Afgelopen 30 Dagen: 36

Altijd: 8,950