Ga door naar hoofdinhoud

Sony Walkman NWZ-E438 Screen Replacement

Wat je nodig hebt

  1. Sony Walkman NWZ-E438 Screen  Replacement, Disassembling Sony Walkman NWZ-E438: stap 1, afbeelding 1 van 1
    • Unscrew the two screws on the back of the device using a Phillips PH000 screwdriver.

    • Keep the Phillips PH000 screwdriver aside for further steps in the guide. It will be the only screwdriver needed for this replacement.

  2. Sony Walkman NWZ-E438 Screen  Replacement: stap 2, afbeelding 1 van 1
    • Use a small prying tool to carefully pry open the back of the device.

  3. Sony Walkman NWZ-E438 Screen  Replacement, Screen: stap 3, afbeelding 1 van 1
    • Pull up the 2 copper strips connecting the outside of the device to the inside of the device.

  4. Sony Walkman NWZ-E438 Screen  Replacement: stap 4, afbeelding 1 van 1
    • Using the small, plastic prying tool wedge it between the bottom of the frame and the outer frame.

    • Slowly circle the device, popping the outside of the frame off.

  5. Sony Walkman NWZ-E438 Screen  Replacement: stap 5, afbeelding 1 van 1
    • To remove the screen, use the fine point tweezers and lift up on the metal piece at the bottom of the frame.

  6. Sony Walkman NWZ-E438 Screen  Replacement: stap 6, afbeelding 1 van 1
    • To remove screen from metal backing, use fine point tweezers to go in between the screen and metal backing and slowly pull them apart.

  7. Sony Walkman NWZ-E438 Screen  Replacement: stap 7, afbeelding 1 van 1
    • The screen will be removed.

Conclusie

To reassemble your device, follow these instructions in reverse order.

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 1

Altijd: 673