Repareer je spullen Gemeenschap Winkel

Sony Vaio Tap 11 Screen Assembly Replacement

Inleiding

In this guide, you will remove the 5 screws holding the device together. In addition, this guide details the various cables connecting the screen to the motherboard.

Wat je nodig hebt

  1. Sony Vaio Tap 11 Screen Assembly Replacement, Screen Assembly: stap 1, afbeelding 1 van 1

    • Begin by opening the HDMI/USB port cover on the left edge.

    • Remove the three #000 headed, 3 mm long screws located underneath the port cover.

    Bewerken

  3. Sony Vaio Tap 11 Screen Assembly Replacement: stap 2, afbeelding 1 van 1

    • Locate and open the Micro SD slot on the top side of the device.

    • Remove the two screws located beneath the cover.

    Bewerken

  4. Sony Vaio Tap 11 Screen Assembly Replacement: stap 3, afbeelding 1 van 2 Sony Vaio Tap 11 Screen Assembly Replacement: stap 3, afbeelding 2 van 2

    • Attach the suction cup to the top right area of the screen.

    • Pull to separate the screen from the rest of the device.

    • Be aware of the front camera cable that is still connected to the rest of the device.

    • Detach the display ribbon cable.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

3 andere personen hebben deze handleiding voltooid.

Auteur

met 6 andere bijdragers

Alexander Bridges

Lid sinds: 09/16/15

1.217 Reputatie

7 handleidingen geschreven

Medailles: 17

+14 andere badges

Team

IUPUI, Team 1-2, Harley Fall 2015 Lid van IUPUI, Team 1-2, Harley Fall 2015

IUPUI-HARLEY-F15S1G2

4 Leden

20 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 4

Afgelopen 30 dagen: 13

Altijd: 2,597