Inleiding

If the LCD Display Screen is black, cracked, or has colored lines running through it when the computer is on, the screen is broken. Follow these instructions on how to install a screen

Onderdelen

Geen onderdelen nodig.

Place the computer on a flat surface with the top facing up.
  • Place the computer on a flat surface with the top facing up.

  • Open the screen.

Voeg opmerking toe

Locate the rubber screw caps at the two bottom corners of the screen.
  • Locate the rubber screw caps at the two bottom corners of the screen.

  • Use your finger to remove the rubber screw caps.

Voeg opmerking toe

  • Locate the two screws, one on each bottom corner.

  • Unscrew the screws with a Phillips head size #0 screwdriver.

  • Keep track of the screws. They are small and easy to misplace.

Voeg opmerking toe

  • Use a plastic opening tool to gently lift the plastic casing that borders the screen.

  • Pop off the casing by working the tool around the outside of it.

  • Wiggling the tool may be required. The casing could be fitted snugly.

Voeg opmerking toe

  • Carefully flip down the screen so it rests on the keyboard.

  • Locate the wire connector on the back of the screen and use a plastic opening tool to gently loosen the wire connection.

Voeg opmerking toe

  • Remove the screen.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Andrew Ricker

Lid sinds: 04-04-12

68 Reputatie

1 Handleiding geschreven

Team

Cal Poly, Team 5-3, Forte Spring 2012 Lid van Cal Poly, Team 5-3, Forte Spring 2012

CPSU-FORTE-S12S5G3

5 Leden

6 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 3

Afgelopen 30 Dagen: 16

Altijd: 2,932