Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Inleiding

If you find that your laptop no longer connects to a Wi-Fi connection. It may be time to replace the wireless network card.

Onderdelen

Geen onderdelen opgegeven.

  1. Remove the twelve 5 mm Phillips #0 screws from the bottom of the laptop.
    • Remove the twelve 5 mm Phillips #0 screws from the bottom of the laptop.

  2. Remove the two 5 mm Phillips #0 screws from the bottom of the laptop.
    • Remove the two 5 mm Phillips #0 screws from the bottom of the laptop.

  3. Using the plastic prying tools, go around the edge of the bottom of the laptop to release the cover.
    • Using the plastic prying tools, go around the edge of the bottom of the laptop to release the cover.

  4. Disconnect the black and white antenna wires from the wifi card.
    • Disconnect the black and white antenna wires from the wifi card.

    • Make sure to lift the plugs straight up from the sockets and not from an angle.

  5. Remove the 3 mm Phillips #0 screw from the wifi card. Remove the card from its socket.
    • Remove the 3 mm Phillips #0 screw from the wifi card.

    • Remove the card from its socket.

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Alex Pham

Lid sinds: 28-09-18

207 Reputatie

1 Handleiding geschreven

Één commentaar

Perfect hardware guide, but i make this and windows 10 recognizes the card, but does not start the Wifi, my laptop SVE14A2X1EW does not have wifi switch or Fn buttons, and I have no way to enable the wifi, some trick?

VirusBCN - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 7

Afgelopen 30 dagen: 62

Altijd: 1,363