Ga door naar hoofdinhoud

Wat je nodig hebt

  1. Sony VAIO PCG-933A Thermal Paste Replacement, Battery: stap 1, afbeelding 1 van 2 Sony VAIO PCG-933A Thermal Paste Replacement, Battery: stap 1, afbeelding 2 van 2
    • Turn the laptop upside down so that the top is sitting on a flat surface.

    • If you are looking at the bottom of the laptop the battery is located on the front right side of the laptop; the opposite side from the floppy disk drive.

  2. Sony VAIO PCG-933A Thermal Paste Replacement: stap 2, afbeelding 1 van 3 Sony VAIO PCG-933A Thermal Paste Replacement: stap 2, afbeelding 2 van 3 Sony VAIO PCG-933A Thermal Paste Replacement: stap 2, afbeelding 3 van 3
    • As shown by the arrow, slide the plastic cover up and then pull out and downwards.

    • You should now be able to pull the battery out.

  3. Sony VAIO PCG-933A Thermal Paste Replacement, Keyboard: stap 3, afbeelding 1 van 1
    • Remove the four 16 mm screws bordering the edge of the laptop using a Phillips #0 screwdriver.

  4. Sony VAIO PCG-933A Thermal Paste Replacement: stap 4, afbeelding 1 van 2 Sony VAIO PCG-933A Thermal Paste Replacement: stap 4, afbeelding 2 van 2
    • Remove the 4mm screw on the right rear side of the laptop next to the audio ports using a Phillips #0 screwdriver.

    • This will release the speaker grille.

  5. Sony VAIO PCG-933A Thermal Paste Replacement: stap 5, afbeelding 1 van 1
    • Flip the computer so the key board is facing up.

  6. Sony VAIO PCG-933A Thermal Paste Replacement: stap 6, afbeelding 1 van 3 Sony VAIO PCG-933A Thermal Paste Replacement: stap 6, afbeelding 2 van 3 Sony VAIO PCG-933A Thermal Paste Replacement: stap 6, afbeelding 3 van 3
    • Slide the blue speaker grille (located above the keyboard) to the right and gently pull upward. The grille will still be connected by a white electrical strip.

    • Carefully pull out the white electrical strip. By doing this you will remove the speaker grille.

  7. Sony VAIO PCG-933A Thermal Paste Replacement: stap 7, afbeelding 1 van 3 Sony VAIO PCG-933A Thermal Paste Replacement: stap 7, afbeelding 2 van 3 Sony VAIO PCG-933A Thermal Paste Replacement: stap 7, afbeelding 3 van 3
    • Remove the 4mm screw in the center using a Phillips screwdriver.

    • Carefully and slowly pull the green strip straight up (away from the laptop) to disconnect it. Make sure not to pull too hard to avoid breaking.

    • The keyboard can now be removed.

  8. Sony VAIO PCG-933A Thermal Paste Replacement, Thermal Paste: stap 8, afbeelding 1 van 2 Sony VAIO PCG-933A Thermal Paste Replacement, Thermal Paste: stap 8, afbeelding 2 van 2
    • Remove the two 4mm Phillips screws in the center of the computer located on each side of the copper electrical strip.

  9. Sony VAIO PCG-933A Thermal Paste Replacement: stap 9, afbeelding 1 van 3 Sony VAIO PCG-933A Thermal Paste Replacement: stap 9, afbeelding 2 van 3 Sony VAIO PCG-933A Thermal Paste Replacement: stap 9, afbeelding 3 van 3
    • Remove the four 4mm Phillips screws around the hard drive cage.

    • WARNING: DVD drive is now loose as well.

    • Lift hard drive cage straight up.

    • Carefully disconnect the copper strip to pull out the hard drive.

  10. Sony VAIO PCG-933A Thermal Paste Replacement: stap 10, afbeelding 1 van 2 Sony VAIO PCG-933A Thermal Paste Replacement: stap 10, afbeelding 2 van 2
    • With the hard drive removed, unscrew the four 6mm brass colored, Phillips screws under the hard drive cage

    • This will allow you to remove the hard drive mounting bracket

  11. Sony VAIO PCG-933A Thermal Paste Replacement: stap 11, afbeelding 1 van 1
    • Remove the three 6mm brass colored, Phillips screws that hold the fan cage in place.

  12. Sony VAIO PCG-933A Thermal Paste Replacement: stap 12, afbeelding 1 van 2 Sony VAIO PCG-933A Thermal Paste Replacement: stap 12, afbeelding 2 van 2
    • Remove the two 4mm black Phillips screws shown here.

    • Remove the 18mm silver Phillips screw shown here.

    • Now remove the silver tab.

  13. Sony VAIO PCG-933A Thermal Paste Replacement: stap 13, afbeelding 1 van 2 Sony VAIO PCG-933A Thermal Paste Replacement: stap 13, afbeelding 2 van 2
    • Remove the blue and red fan power cords.

  14. Sony VAIO PCG-933A Thermal Paste Replacement: stap 14, afbeelding 1 van 2 Sony VAIO PCG-933A Thermal Paste Replacement: stap 14, afbeelding 2 van 2
    • Carefully pull up and out on the metal heat sink and fan bracket.

    • You should be able to see the thermal paste.

  15. Sony VAIO PCG-933A Thermal Paste Replacement: stap 15, afbeelding 1 van 1
    • To remove thermal paste thoroughly, put isopropyl alcohol (70% or greater) on a paper towel and wipe thermal paste off. Some force may be required.

    • Apply new thermal paste to CPU.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Sara Lillard

Lid sinds: 11-04-11

165 Reputatie

8 handleidingen geschreven

Team

Cal Poly, Team 12-36, Maness Spring 2011 Lid van Cal Poly, Team 12-36, Maness Spring 2011

CPSU-MANESS-S11S12G36

4 Leden

16 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 9

Altijd: 3,960