Menu

Jouw instellingen

Mijn werkbank

Krijg snel toegang tot handleidingen, onderdelen en antwoorden voor jouw apparaten
Winkelwagen

Het lijkt erop dat je mandje leeg is

Doorblader onze winkel

Sony VAIO PCG-933A Hard Drive Replacement

Aanbevolen

Geschreven door: Sara Lillard (en 6 andere bijdragers)
  • Reacties: 1
  • Favorieten: 3
  • Voltooide reparaties: 2

Uitgelichte handleiding

Moeilijkheid

Gemiddeld

Stappen

10

Tijd vereist

25 minuten

Secties

3

Markeringen

2

Confusing Text

Verwarrende Tekst

Een deel van de tekst in deze handleiding is verwarrend, dubbelop of naast de kwestie. Bewerk de tekst en maak hem duidelijker!

Featured Guide

Uitgelichte handleiding

De iFixit-werknemers vonden deze handleiding uitzonderlijk cool.

Inleiding

This repair guide shows how to replace your hard drive.

Gereedschap

Koop deze gereedschappen

Onderdelen

Geen onderdelen opgegeven.

  1. Turn the laptop upside down The battery is located on the front right side of the laptop; the opposite side from the floppy disk drive.

    • Turn the laptop upside down

    • The battery is located on the front right side of the laptop; the opposite side from the floppy disk drive.

    Bewerken

  2. As shown by the arrow, slide the plastic cover up and then pull out and downwards. You should now be able to pull the battery out. You should now be able to pull the battery out.

    • As shown by the arrow, slide the plastic cover up and then pull out and downwards.

    • You should now be able to pull the battery out.

    Bewerken

  3. Remove the four 16mm Phillips screws bordering the edge of the laptop, indicated here.

    • Remove the four 16mm Phillips screws bordering the edge of the laptop, indicated here.

    Bewerken

  4. Remove the 4mm Phillips screw on the right rear side of the laptop next to the audio ports. This will release the speaker grille.

    • Remove the 4mm Phillips screw on the right rear side of the laptop next to the audio ports.

    • This will release the speaker grille.

    Bewerken

  5. Koop geen nieuw model.

    Bespaar $10 op $50 met coupon
    SKIPANDSAVE10

    Bespaar nu

    Koop geen nieuw model.

    Take $10 off $50 with
    SKIPANDSAVE10

    Bespaar nu

  6. Flip the computer back over and open the screen.

    • Flip the computer back over and open the screen.

    Bewerken

  7. Slide the blue speaker grille (located above the keyboard) to the right and gently pull upward. The grille will still be connected by a white electrical strip. Carefully pull out the white electrical strip. Carefully pull out the white electrical strip.

    • Slide the blue speaker grille (located above the keyboard) to the right and gently pull upward. The grille will still be connected by a white electrical strip.

    • Carefully pull out the white electrical strip.

    Bewerken

  8. Remove the 4mm Phillips screw in the center (located to the left of the green strip). Carefully pull the green strip straight up to disconnect it. The keyboard can now be removed.

    • Remove the 4mm Phillips screw in the center (located to the left of the green strip).

    • Carefully pull the green strip straight up to disconnect it.

    • The keyboard can now be removed.

    Bewerken

  9. Remove the two 4mm Phillips screws in the center of the computer located on each side of the copper electrical strip. Remove the two 4mm Phillips screws in the center of the computer located on each side of the copper electrical strip.

    • Remove the two 4mm Phillips screws in the center of the computer located on each side of the copper electrical strip.

    Bewerken

  10. Remove the four 4mm Phillips screws around the hard drive cage. WARNING: DVD drive is now loose as well. Carefully lift the hard drive cage out.

    • Remove the four 4mm Phillips screws around the hard drive cage.

    • WARNING: DVD drive is now loose as well.

    • Carefully lift the hard drive cage out.

    • Carefully disconnect the copper strip to pull out the hard drive.

    Bewerken

  11. Remove the four 4mm Phillips screws that hold the hard drive in the hard drive cage. Gently remove the hard drive from the cage. Gently remove the copper electrical strip from the harddrive.

    • Remove the four 4mm Phillips screws that hold the hard drive in the hard drive cage.

    • Gently remove the hard drive from the cage.

    • Gently remove the copper electrical strip from the harddrive.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Auteur

met 6 andere bijdragers

Sara Lillard

Lid sinds: 11-04-11

117 Reputatie

8 handleidingen geschreven

Badges: 8

+5 andere badges

Team

Cal Poly, Team 12-36, Maness Spring 2011 Lid van Cal Poly, Team 12-36, Maness Spring 2011

CPSU-MANESS-S11S12G36

4 Leden

8 handleidingen geschreven

Één commentaar

Een opmerking toevoegen

Totally dident expect to find a guide for taking this one apart. Appreciate it!

pat - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 8

Afgelopen 30 Dagen: 15

Altijd: 5,089