Repareer je spullen Gemeenschap Winkel

Sony PS-LX300USB Dust Cover Replacement

Inleiding

The dust cover is one of the key components of a PS-LX300USB Turntable. The dustcover keeps all of the fragile components safe from dust and other potential hazards. The repair is relatively easy and can be important in maintaining your turn table.

Wat je nodig hebt

  1. Sony PS-LX300USB Dust Cover Replacement, Dust Cover: stap 1, afbeelding 1 van 1

    • Turn the turntable around so that the back side is visible.

    Bewerken

  2. Sony PS-LX300USB Dust Cover Replacement: stap 2, afbeelding 1 van 2 Sony PS-LX300USB Dust Cover Replacement: stap 2, afbeelding 2 van 2

    • Begin by releasing the left latch. Apply downward pressure to the square, black button using a flathead screw driver.

    • Once the latch is released, lift upward.

    • Use your left hand to hold the left side of the dust cover above the latch. This ensures the latch does not reconnect.

    Bewerken

  4. Sony PS-LX300USB Dust Cover Replacement: stap 3, afbeelding 1 van 1

    • Use a flat head screw driver to apply pressure to the black square button on the right side.

    Bewerken

  5. Sony PS-LX300USB Dust Cover Replacement: stap 4, afbeelding 1 van 2 Sony PS-LX300USB Dust Cover Replacement: stap 4, afbeelding 2 van 2

    • Once both the right and left buttons are released, pull the dust cover upwards.

    • The dust cover is now disconnected and ready for replacement.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 3 andere bijdragers

Sean

Lid sinds: 09/27/17

109 Reputatie

1 Handleiding geschreven

Medailles: 2

Team

Cal Poly, Team S8-G3, Banghart Fall 2017 Lid van Cal Poly, Team S8-G3, Banghart Fall 2017

CPSU-BANGHART-F17S8G3

5 Leden

5 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 6

Afgelopen 30 dagen: 22

Altijd: 2,294