Inleiding

In order to keep your device in working order, the tape transport unit may need to be replaced.

Onderdelen

Geen onderdelen nodig.

  1. Remove the eight (8) Phillips #00 screws. There are six (6) screws on the bottom of the camera and two (2) screws beneath the back light button.
    • Remove the eight (8) Phillips #00 screws. There are six (6) screws on the bottom of the camera and two (2) screws beneath the back light button.

    Voeg opmerking toe

  2. Remove the five (5) Phillips #00 cassette side screws.
    • Remove the five (5) Phillips #00 cassette side screws.

    Voeg opmerking toe

    • Remove the three (3) Phillips #00 screws located on the top of the lens side cover.

    Voeg opmerking toe

    • Remove the Phillips #00 screw holding the microphone on.

    Voeg opmerking toe

    • Remove the two (2) Phillips #00 screws from lens side cover.

    Voeg opmerking toe

    • Slide the lens side cover away from camera.

    Voeg opmerking toe

    • Remove the Phillips #00 screw from the tape transport slider.

    Voeg opmerking toe

    • Remove the four (4) Phillips #00 screws located on the top of the camera.

    Voeg opmerking toe

    • Remove the electrical connector from camera.

    Voeg opmerking toe

    • The tape transport unit is now free from the camera.

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Emma

Lid sinds: 06-10-11

47 Reputatie

4 handleidingen geschreven

Team

UW Stout, Team 1-4, Zhou Fall 2011 Lid van UW Stout, Team 1-4, Zhou Fall 2011

UWSTOUT-ZHOU-F11S1G4

5 Leden

5 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 5

Afgelopen 30 Dagen: 14

Altijd: 2,424