Annuleer

Sony Ericsson Z500a Keypad Replacement

Geschreven door: Jory Benitez (en 11 andere bijdragers)

Reacties: 0
Favorieten: 0

Sony Ericsson Z500a Keypad Replacement

Moeilijkheid

Gemiddeld

Stappen

4

Tijd vereist

Stel een tijd voor??

Inleiding

This guide shows how to remove the phone keypad.

Gereedschap

Koop deze gereedschappen

T6 Torx Screwdriver

US$ 6,99

Koop
iFixit Opening Tools

US$ 1,99

Koop

Onderdelen

Geen onderdelen opgegeven.

Stap 1 Keypad

Remove the back cover and the battery.

Remove the back cover and the battery.

Remove the back cover and the battery.

Remove the back cover and the battery.

Stap 2

Remove the 4 screws using a T6 precision screwdriver.

Remove the 4 screws using a T6 precision screwdriver.
Flip open the phone, and keep the back cover facing you.

Stap 3

Take the plastic opening tool and run it between the phone case and phone body to loosen the key pad while the phone is open.

There are 2 clamps that lock it to the phone case (1 on each side).

Take the plastic opening tool and run it between the phone case and phone body to loosen the key pad while the phone is open.
There are 2 clamps that lock it to the phone case (1 on each side).

Stap 4

Flip the phone over and lift straight up on the key pad to remove it.

Flip the phone over and lift straight up on the key pad to remove it.
Be sure to hold the phone flat (parallel to the table), because there are loose parts that may fall out.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 11 andere bijdragers

Jory Benitez

Lid sinds: 16-04-10

1 Reputatie

1 Handleiding geschreven

Team

Cal Poly, Team 7-12, Maness Spring 2010 Lid van Cal Poly, Team 7-12, Maness Spring 2010

CPSU-MANESS-S10S7G12

4 Leden

10 handleidingen geschreven

0 Opmerkingen

Een opmerking toevoegen

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 2

Altijd: 2,602