Inleiding

Use this guide to replace a defective Logic Board.


Please SUBSCRIBE to my channel ツ

Video overzicht

  1. Switch-off the phone.
    • Switch-off the phone.

    • Remove the battery.

    • Unscrew 8x T6 Torx screws.

    Voeg opmerking toe

  2. Use a Plastic Pry or other plastic tool to unhook the back housing / bezel and remove it.
    • Use a Plastic Pry or other plastic tool to unhook the back housing / bezel and remove it.

    • Tip - try prying it open from the top and over to the side. It can be very tight if you are doing this for the first time. The volume rocker and camera button are not part of the housing, so try going around it.

    Voeg opmerking toe

    • Remove the Volume Up/Down and Camera buttons.

    • Unhook the SIM & SD Card reader unit and disconnect the flex cable.

    Remove sim card and SD card tray beforehand to avoid damaged to them

    Sean Parrish - Antwoord

    • Remove the Audio jack connector.

    • Disconnect 4x flex cables:

      • LCD Display

      • Menu buttons

      • Touchscreen

      • Earpiece, Volume & Power On buttons

    • Carefully remove the mother board.

    • Please SUBSCRIBE to my channel ツ

    before you can remove the mainboard, there are two nozzles at both sides of it, you have to unhook !!

    blablablabla - Antwoord

    He's right edit that in

    Sean Parrish - Antwoord

Conclusie

To reassemble your device, follow these instructions in reverse order.

ZFix

Lid sinds: 09-12-13

158.682 Reputatie

304 handleidingen geschreven

Team

Master Techs Lid van Master Techs

Community

278 Leden

755 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 1

Afgelopen 7 Dagen: 5

Afgelopen 30 Dagen: 20

Altijd: 1,499