Onderdelen

Geen onderdelen nodig.

  1. Lie phone screen down on a flat smooth surface so that the camera, logos, and speaker face up.
    • Lie phone screen down on a flat smooth surface so that the camera, logos, and speaker face up.

    • Using the provided notch on the bottom of the back cover, insert a plastic opening tool and lift upwards to remove the back cover of the phone.

    Voeg opmerking toe

  2. Lie the cover beside the phone upon removal.  Your assembly should appear as shown this far.
    • Lie the cover beside the phone upon removal. Your assembly should appear as shown this far.

    • Insert the plastic opening tool into the crevice between the camera and the battery of the phone. Using a gentle prying motion, lift the end of the battery and remove.

    • After removal, recycle the defective battery appropriately. Take the replacement battery and lie it near the phone as shown. Your assembly should resemble the presented picture. Note that the cover is not included in this particular photo.

    Voeg opmerking toe

    • Slide the SIM card into the lower right slot identified by the circle in the picture, ensuring the contacts are aligned properly.

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Parker Stroble

Lid sinds: 09-03-12

74 Reputatie

3 handleidingen geschreven

Team

Clemson, Team 1-4, Benson Spring 2012 Lid van Clemson, Team 1-4, Benson Spring 2012

CLEM-BENSON-S12S1G4

4 Leden

14 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 1

Afgelopen 30 Dagen: 1

Altijd: 796