Inleiding

This guide will assist you in removing the logic board from your Sony Ericsson T68i.

Onderdelen

Geen onderdelen nodig.

  1. Remove the battery from the back.
    • Remove the battery from the back.

    Voeg opmerking toe

  2. Pry off the plastic cover from the top with a thin plastic shim, then remove it from the two bottom clips.
    • Pry off the plastic cover from the top with a thin plastic shim, then remove it from the two bottom clips.

    • Do not bend it too far down, or else you risk breaking the two bottom clips.

    Voeg opmerking toe

    • Unscrew all four Torx T6 screws.

    • Keep in a safe place.

    Voeg opmerking toe

    • After removing the screws, the two halves will separate. If not, then pry them gently apart.

    Voeg opmerking toe

    • Remove the circuit board and screen from the device.

    • Use your T6 to remove the 4 screws.

    Voeg opmerking toe

    • Remove the board and screen.

    Voeg opmerking toe

    • Carefully remove the plastic clips holding the screen on the board.

    Voeg opmerking toe

    • Remove the plate protecting the more delicate processing parts from the logic board.

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Tim Dascomb

Lid sinds: 13-04-10

123 Reputatie

7 handleidingen geschreven

Team

Cal Poly, Team 26-34, Regan Spring 2010 Lid van Cal Poly, Team 26-34, Regan Spring 2010

CPSU-REGAN-S10S26G34

4 Leden

13 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 2

Altijd: 1,891