Ga door naar hoofdinhoud
Word lid van de reparatiegemeenschap - Account aanmaken

Sony Cybershot DSC-S750 Screen Replacement

Wat je nodig hebt

    1. Sony Cybershot DSC-S750 Screen Replacement, Screen: stap 1, afbeelding 1 van 3 Sony Cybershot DSC-S750 Screen Replacement, Screen: stap 1, afbeelding 2 van 3 Sony Cybershot DSC-S750 Screen Replacement, Screen: stap 1, afbeelding 3 van 3
      • Remove all screws on the outer shell of the camera with a small Phillips head screwdriver.

      Vraag FixBot

      Voeg opmerking toe

    2. Sony Cybershot DSC-S750 Screen Replacement: stap 2, afbeelding 1 van 2 Sony Cybershot DSC-S750 Screen Replacement: stap 2, afbeelding 2 van 2
      • Now that the inner shell is exposed after unscrewing the outer shell, remove the screws from the inner shell of the camera.

      Vraag FixBot

      Voeg opmerking toe

    3. Sony Cybershot DSC-S750 Screen Replacement: stap 3, afbeelding 1 van 2 Sony Cybershot DSC-S750 Screen Replacement: stap 3, afbeelding 2 van 2
      • Remove the screw from the battery housing.

      • This will allow you to remove the back of the camera which makes accessing the screen easier.

      Vraag FixBot

      Voeg opmerking toe

    4. Sony Cybershot DSC-S750 Screen Replacement: stap 4, afbeelding 1 van 2 Sony Cybershot DSC-S750 Screen Replacement: stap 4, afbeelding 2 van 2
      • Remove the ribbon cable that connects the screen to the battery.

      • Remove the ribbon cable that is used to connect the LCD screen to the mother board.

      • To ensure no damage is done when disconnecting the ribbon cables, pull carefully on the white plastic portions using a pair of tweezers.

      Vraag FixBot

      Voeg opmerking toe

    5. Sony Cybershot DSC-S750 Screen Replacement: stap 5, afbeelding 1 van 2 Sony Cybershot DSC-S750 Screen Replacement: stap 5, afbeelding 2 van 2
      • Remove all the screws from the screen housing.

      Vraag FixBot

      Voeg opmerking toe

    6. Sony Cybershot DSC-S750 Screen Replacement: stap 6, afbeelding 1 van 1
      • Connect your new screen into the ribbon cable housing.

      • When plugging in the new screen ensure that the black portion of the cable is flush and inserted carefully otherwise the screen will not display.

      Vraag FixBot

      Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Annuleren: ik heb deze handleiding niet afgemaakt.

Één andere persoon heeft deze handleiding voltooid.

Bijgevoegde documenten

Frankye Perez

Lid sinds: 08/28/25

139 Reputatie

1 Handleiding geschreven

Team

CSU Los Angeles, Team 8-7, Grodsky Fall 2025 Lid van CSU Los Angeles, Team 8-7, Grodsky Fall 2025

CSULA-GRODSKY-F25S8G7

2 Leden

12 handleidingen geschreven

0Gids Commentaar

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 11

Afgelopen 30 dagen: 80

Altijd: 434