Inleiding

Disassembling the back cover of the camera so that we can repair components from the inside.

Onderdelen

Geen onderdelen nodig.

Slide the battery cover in the direction the arrow points.
  • Slide the battery cover in the direction the arrow points.

  • Pull the battery cover towards you.

Voeg opmerking toe

Flick the blue switch for the battery to pop out.
  • Flick the blue switch for the battery to pop out.

  • Remove the battery from the camera.

Voeg opmerking toe

  • Using the Phillips #00 Screwdriver, remove the two screws from the caution panel.

  • Remove that panel.

  • Careful for falling pieces.

Voeg opmerking toe

  • Remove the screw with a Phillips #00 Screwdriver from the right side of the camera (with '3x optical zoom' engraved on the side panel).

  • Remove that panel.

Voeg opmerking toe

  • Remove the screw using the Phillips #00 Screwdriver from the bottom the camera, closest to the back cover.

Voeg opmerking toe

  • Gently remove the back cover.

  • It may be a bit stiff, so use some force to remove it. Proceed with caution.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

kkfong91

Lid sinds: 11-10-10

293 Reputatie

2 handleidingen geschreven

Team

Cal Poly, Team 9-20, Regan Fall 2010 Lid van Cal Poly, Team 9-20, Regan Fall 2010

CPSU-REGAN-F10S9G20

5 Leden

9 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 1

Afgelopen 7 Dagen: 2

Afgelopen 30 Dagen: 10

Altijd: 3,237