Inleiding

This guide will allow the user to remove the front cover of the camera, necessary for most other steps.

Onderdelen

Geen onderdelen nodig.

The battery cover is located on the right side of the camera.
  • The battery cover is located on the right side of the camera.

  • Slide the cover to expose the battery.

Voeg opmerking toe

Ensure that the battery lines up properly with the slot in the camera.
  • Ensure that the battery lines up properly with the slot in the camera.

  • Slide battery in.

  • Slide cover closed.

  • Battery not shown

Voeg opmerking toe

Remove screws from outside of camera. There are 6 screws total. 3 screws on underside. 1 screw on right side, near battery cover.
  • Remove screws from outside of camera. There are 6 screws total.

  • 3 screws on underside.

  • 1 screw on right side, near battery cover.

  • 2 screws on left side.

Voeg opmerking toe

Use screwdriver to remove screws.
  • Use screwdriver to remove screws.

Voeg opmerking toe

Gently pull the front cover off of the main camera.
  • Gently pull the front cover off of the main camera.

  • All of the inner parts of the camera are attached to the back screen.

Voeg opmerking toe

The front cover is now removed from the camera and the internal hardware is now exposed.
  • The front cover is now removed from the camera and the internal hardware is now exposed.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Stephannie Allen

Lid sinds: 11-03-13

189 reputatie

10 handleidingen geschreven

Team

Clemson, Team 13-1, Benson Spring 2013 Lid van Clemson, Team 13-1, Benson Spring 2013

CLEM-BENSON-S13S13G1

4 Leden

10 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 0

Altijd: 236