Inleiding

The back cover needs to be removed for most other repair guides in order to access more parts within the camera.

Onderdelen

Geen onderdelen nodig.

The battery cover is located on the right side of the camera.
  • The battery cover is located on the right side of the camera.

  • Slide the cover to expose the battery.

Voeg opmerking toe

Ensure that the battery lines up properly with the slot in the camera.
  • Ensure that the battery lines up properly with the slot in the camera.

  • Slide battery in.

  • Slide cover closed.

  • Battery not shown

Voeg opmerking toe

Remove screws from outside of camera. There are 6 screws total. 3 screws on underside. 1 screw on right side, near battery cover.
  • Remove screws from outside of camera. There are 6 screws total.

  • 3 screws on underside.

  • 1 screw on right side, near battery cover.

  • 2 screws on left side.

Voeg opmerking toe

Use screwdriver to remove screws.
  • Use screwdriver to remove screws.

Voeg opmerking toe

Gently pull the front cover off of the main camera.
  • Gently pull the front cover off of the main camera.

  • All of the inner parts of the camera are attached to the back screen.

Voeg opmerking toe

The front cover is now removed from the camera and the internal hardware is now exposed.
  • The front cover is now removed from the camera and the internal hardware is now exposed.

Voeg opmerking toe

This is the camera without the front cover.
  • This is the camera without the front cover.

Voeg opmerking toe

Remove tripod piece located at the bottom of the camera. This piece should slide out with ease.
  • Remove tripod piece located at the bottom of the camera. This piece should slide out with ease.

Voeg opmerking toe

Slide open the top panel. This is located on the top of the camera, where the power button and shutter button are. Slide open the top panel. This is located on the top of the camera, where the power button and shutter button are. Slide open the top panel. This is located on the top of the camera, where the power button and shutter button are.
  • Slide open the top panel. This is located on the top of the camera, where the power button and shutter button are.

Voeg opmerking toe

Pull apart the inner hardware from the back case by prying on the left side. Pull apart the inner hardware from the back case by prying on the left side. Pull apart the inner hardware from the back case by prying on the left side.
  • Pull apart the inner hardware from the back case by prying on the left side.

Voeg opmerking toe

Remove the back cover.
  • Remove the back cover.

Voeg opmerking toe

The back cover is now removed from the internal hardware.
  • The back cover is now removed from the internal hardware.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Stephannie Allen

Lid sinds: 11-03-13

189 Reputatie

10 handleidingen geschreven

Team

Clemson, Team 13-1, Benson Spring 2013 Lid van Clemson, Team 13-1, Benson Spring 2013

CLEM-BENSON-S13S13G1

4 Leden

10 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 2

Altijd: 351