Inleiding

This is a step by step guide to uninstalling the front casing of the camera.

Onderdelen

Geen onderdelen nodig.

  1. First locate the appropriate screws for detachment. First locate the appropriate screws for detachment. First locate the appropriate screws for detachment.
    • First locate the appropriate screws for detachment.

  2. Remove the five screws shown using a Phillips #00 Screwdriver.
    • Remove the five screws shown using a Phillips #00 Screwdriver.

    • It is important to put the small screws in a safe location in order to reassemble the casing.

  3. Gratis verzending van alle bestellingen van meer dan US$ 100 of met een Pro Tech Toolkit!

    Doorblader onze winkel
  4. Using a spudger, carefully pry open the front casing.
    • Using a spudger, carefully pry open the front casing.

  5. Carefully separate the front casing from the camera body. CAUTION: Be careful not to break the wire connecting the front casing and the camera.
    • Carefully separate the front casing from the camera body.

    • CAUTION: Be careful not to break the wire connecting the front casing and the camera.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Katie McCraw

Lid sinds: 09-03-12

191 Reputatie

7 handleidingen geschreven

Team

Clemson, Team 1-5, Benson Spring 2012 Lid van Clemson, Team 1-5, Benson Spring 2012

CLEM-BENSON-S12S1G5

4 Leden

7 handleidingen geschreven

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 3

Altijd: 1,098