First locate the appropriate screws for detachment. First locate the appropriate screws for detachment. First locate the appropriate screws for detachment.
  • First locate the appropriate screws for detachment.

Voeg opmerking toe

Remove the five screws shown using a Phillips #00 Screwdriver.
  • Remove the five screws shown using a Phillips #00 Screwdriver.

  • It is important to put the small screws in a safe location in order to reassemble the casing.

Voeg opmerking toe

Using a spudger, carefully pry open the front casing.
  • Using a spudger, carefully pry open the front casing.

Voeg opmerking toe

Carefully separate the front casing from the camera body. CAUTION: Be careful not to break the wire connecting the front casing and the camera.
  • Carefully separate the front casing from the camera body.

  • CAUTION: Be careful not to break the wire connecting the front casing and the camera.

Voeg opmerking toe

It is necessary to first locate the appropriate screws in order to disassemble the back casing. It is necessary to first locate the appropriate screws in order to disassemble the back casing. It is necessary to first locate the appropriate screws in order to disassemble the back casing.
  • It is necessary to first locate the appropriate screws in order to disassemble the back casing.

Voeg opmerking toe

Remove the found screws with a small screwdriver.
  • Remove the found screws with a small screwdriver.

  • It is important to put the small screws in a safe location in order to reassemble the casing.

Voeg opmerking toe

Carefully pull the back casing away from the camera.
  • Carefully pull the back casing away from the camera.

Voeg opmerking toe

The back casing is now removed from the camera.
  • The back casing is now removed from the camera.

Voeg opmerking toe

Remove the two screws on the back side of the camera surrounding the LCD screen. Remove the two screws on the back side of the camera surrounding the LCD screen.
  • Remove the two screws on the back side of the camera surrounding the LCD screen.

Voeg opmerking toe

Remove the two ribbon traces found on the left side of the lens on the front of camera holding the lens in place. Carefully pull the lens away front the camera until it is released. Carefully pull the lens away front the camera until it is released.
  • Remove the two ribbon traces found on the left side of the lens on the front of camera holding the lens in place.

  • Carefully pull the lens away front the camera until it is released.

Voeg opmerking toe

The lens is now successfully removed from the camera.
  • The lens is now successfully removed from the camera.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Katie McCraw

Lid sinds: 09-03-12

191 Reputatie

7 handleidingen geschreven

Team

Clemson, Team 1-5, Benson Spring 2012 Lid van Clemson, Team 1-5, Benson Spring 2012

CLEM-BENSON-S12S1G5

4 Leden

7 handleidingen geschreven

Één commentaar

Is there a way to disassemble the lens to correct the alignment. My daughter dropped it and I think the mechanism has been misaligned.

Macjune Tolentino - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 4

Altijd: 2,208