Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Inleiding

This guide will walk you through how to replace the LCD screen of your Sony Cyber-shot DSC-P10 camera.

Onderdelen

Geen onderdelen opgegeven.

  1. Remove the two screws from the top of the camera. Remove the two screws from the bottom of the camera. Remove the rear cover of the camera.
    • Remove the two screws from the top of the camera.

    • Remove the two screws from the bottom of the camera.

    • Remove the rear cover of the camera.

  2. Peel the strip of the black padding off of the screw. Remove the screw. Lift the right side of the screen up, then pull the screen to the right to free the LCD screen.
    • Peel the strip of the black padding off of the screw.

    • Remove the screw.

    • Lift the right side of the screen up, then pull the screen to the right to free the LCD screen.

    • Carefully pull on the ribbon cables to disconnect them.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Adrian

Lid sinds: 11-10-11

22 Reputatie

1 Handleiding geschreven

Team

UW Stout, Team 1-1, Zhou Fall 2011 Lid van UW Stout, Team 1-1, Zhou Fall 2011

UWSTOUT-ZHOU-F11S1G1

5 Leden

3 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 5

Afgelopen 30 dagen: 16

Altijd: 1,980