Inleiding

This will help you to remove the front cover so you can get to the other parts of the Bloggie 3D Camera.

  1. Remove the two 2.5mm Phillips #00 screws using the Philips #00 screwdriver.
    • Remove the two 2.5mm Phillips #00 screws using the Philips #00 screwdriver.

  2. Gratis verzending van alle bestellingen van meer dan US$ 100 of met een Pro Tech Toolkit!

    Doorblader onze winkel
  3. Use a plastic opening tool to pry the cover open. After the the cover is partly open as shown, remove the cover with your hands.
    • Use a plastic opening tool to pry the cover open.

    • After the the cover is partly open as shown, remove the cover with your hands.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Robert Tam

Lid sinds: 30-01-13

6 Reputatie

2 handleidingen geschreven

Team

Cal Poly, Team 7-12, Maness Winter 2013 Lid van Cal Poly, Team 7-12, Maness Winter 2013

CPSU-MANESS-W13S7G12

5 Leden

6 handleidingen geschreven

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 0

Altijd: 241