Ga door naar hoofdinhoud

Solio Rocsta Charging Cable Replacement

Wat je nodig hebt

  1. Solio Rocsta Charging Cable Replacement, Charging Cable: stap 1, afbeelding 1 van 2 Solio Rocsta Charging Cable Replacement, Charging Cable: stap 1, afbeelding 2 van 2
    • Locate, and unscrew, the three 5.72 mm screws that hold down the top cover using the T6 Torx screwdriver.

  2. Solio Rocsta Charging Cable Replacement: stap 2, afbeelding 1 van 2 Solio Rocsta Charging Cable Replacement: stap 2, afbeelding 2 van 2
    • Remove top cover.

    • Caution: the solar cell is attached to the top cover and connected to the circuit board by a short wire.

  3. Solio Rocsta Charging Cable Replacement: stap 3, afbeelding 1 van 1
    • Using the spudger, pry the battery off the back cover.

  4. Solio Rocsta Charging Cable Replacement: stap 4, afbeelding 1 van 1
    • Unscrew the 5.66 mm screws attaching the circuit board to the case.

  5. Solio Rocsta Charging Cable Replacement: stap 5, afbeelding 1 van 1
    • With the circuit board flipped, locate the battery connector.

    • Hold the component attached to the circuit board the battery is connected to and wiggle the cable out.

  6. Solio Rocsta Charging Cable Replacement: stap 6, afbeelding 1 van 1
    • With a Soldering Iron, desolder the four cables that connect the charging cable to the circuit board.

    • The power cable is a series of four cables. Make note of each cable placement for easy resoldering.

    • For more information on how to solder and desolder connections, please visit this guide.

Conclusie

To reassemble your device, follow these instructions in reverse order.

David Vazquez

Lid sinds: 10/10/17

577 Reputatie

5 handleidingen geschreven

Team

USF Tampa, Team S13-G13, Cagle Fall 2017 Lid van USF Tampa, Team S13-G13, Cagle Fall 2017

USFT-CAGLE-F17S13G13

4 Leden

6 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 180