Ga door naar hoofdinhoud

Snowboard Binding Replacement

Wat je nodig hebt

  1. Snowboard Binding Replacement, Binding: stap 1, afbeelding 1 van 3 Snowboard Binding Replacement, Binding: stap 1, afbeelding 2 van 3 Snowboard Binding Replacement, Binding: stap 1, afbeelding 3 van 3
    • Release the binding straps by lifting up on the buckle and pulling towards the direction of the end of the ladder.

    • Not all binding straps will release the same way. If you are having trouble releasing your binding straps, please refer to your owner's manual.

  2. Snowboard Binding Replacement: stap 2, afbeelding 1 van 2 Snowboard Binding Replacement: stap 2, afbeelding 2 van 2
    • Move the straps and the highback plate out of the way in order to have clear access to the foot pad screw.

    • The highback plate is the vertical support plate located on the heel side of the binding.

  3. Snowboard Binding Replacement: stap 3, afbeelding 1 van 2 Snowboard Binding Replacement: stap 3, afbeelding 2 van 2
    • Use a #2 Phillips screwdriver to remove the panhead, 10mm wide, M4 x 12mm screw located in the middle of the foot pad.

  4. Snowboard Binding Replacement: stap 4, afbeelding 1 van 3 Snowboard Binding Replacement: stap 4, afbeelding 2 van 3 Snowboard Binding Replacement: stap 4, afbeelding 3 van 3
    • Use a #2 Phillips screwdriver to remove the four ovalhead M6 x 12mm screws that attach the base plate of the binding to the board.

    • Lift or slide the binding off the board and set the screws aside.

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Loren Sunding

Lid sinds: 01/14/14

118 Reputatie

1 Handleiding geschreven

Team

Cal Poly, Team 17-4, Forte Winter 2014 Lid van Cal Poly, Team 17-4, Forte Winter 2014

CPSU-FORTE-W14S17G4

5 Leden

9 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 7

Afgelopen 7 dagen: 38

Afgelopen 30 dagen: 195

Altijd: 13,298