Small Engine Recoil Starter Replacement - iFixit reparatiehandleiding

Inleiding

This guide will show how to take apart and repair the small engine recoil starter on a lawn mower.

Wat je nodig hebt

Stap 1 Recoil Starter

Small Engine Recoil Starter Replacement, Recoil Starter: stap 1, afbeelding 1 van 1

To begin the repair remove the protective casing. (This removal may vary with different lawnmowers.)

Stap 2

Small Engine Recoil Starter Replacement: stap 2, afbeelding 1 van 1

Locate the recoil housing cap.

Stap 3

Small Engine Recoil Starter Replacement: stap 3, afbeelding 1 van 1

Carefully remove the housing cap. (Removal may vary)

Stap 4

Small Engine Recoil Starter Replacement: stap 4, afbeelding 1 van 1

After removing the recoil, unscrew the cap that holds the pulley to the recoil starter housing.

Stap 5

Small Engine Recoil Starter Replacement: stap 5, afbeelding 1 van 1

Untie the knot in the rope and slide it out of the housing.

Stap 6

Small Engine Recoil Starter Replacement: stap 6, afbeelding 1 van 1

With this particular model there is a middle lock piece. Use a socket wrench to unscrew and release the coil.

Stap 7

Small Engine Recoil Starter Replacement: stap 7, afbeelding 1 van 1

Once unscrewed, remove the metal piece which releases the tension on the coil.

Stap 8

Small Engine Recoil Starter Replacement: stap 8, afbeelding 1 van 1

At this point add the new coil to the housing base. Snap the coil into position where the old on was.

Conclusie

To reassemble your device, follow these instructions in reverse order.

5 andere personen hebben deze handleiding voltooid.

Auteur

met 2 andere bijdragers

James Marmaud

Lid sinds: 03/20/17

276 Reputatie

1 Handleiding geschreven

+2 andere badges

Team

Missouri Western, Team S40-G16, Kunkel Spring 2017 Lid van Missouri Western, Team S40-G16, Kunkel Spring 2017

MWSU-KUNKEL-S17S40G16

2 Leden

1 handleiding geschreven

0 opmerkingen

Weergavestatistieken:

Afgelopen 24 uren: 3

Afgelopen 7 dagen: 8

Afgelopen 30 dagen: 40

Altijd: 2,737