Repareer je spullen Gemeenschap Winkel

Skullcandy Crusher Wireless Ear Cushion Replacement

Geschreven door: Val (en een andere inzender)
  • Reacties: 0
  • Favorieten: 0

Moeilijkheid

Zeer eenvoudig

Stappen

3

Tijd vereist

2 - 5 minuten

Secties

1

Markeringen

0

Inleiding

Use this guide to replace the ear cushion on a Skullcandy Crusher Wireless headphones. Replacement ear cushions can be bought online or taken from another Skullcandy Crusher Wireless headphone. No additional tools are required to remove or add the ear cushion.

Gereedschap

Geen gereedschap opgegeven.

Onderdelen

  1. Take your headphones and hold them upside down for better control with your hands. Take your headphones and hold them upside down for better control with your hands.

    • Take your headphones and hold them upside down for better control with your hands.

    Bewerken

  3. Grab the ear cushion firmly between your thumb and forefinger with a tight grip. Pull the ear cushion away from the plastic, covering the speaker, by sliding the ear cushion down to release it.

    • Grab the ear cushion firmly between your thumb and forefinger with a tight grip.

    • Pull the ear cushion away from the plastic, covering the speaker, by sliding the ear cushion down to release it.

    Bewerken

  4. Continue pulling it away from the edges of the plastic covering until the cushion is fully removed.

    • Continue pulling it away from the edges of the plastic covering until the cushion is fully removed.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 1 andere bijdrager

Val

Lid sinds: 31-03-22

690 Reputatie

6 handleidingen geschreven

Badges: 7

+4 andere badges

Team

UMass Dartmouth, Team 1-33, Gurgel Spring 2022 Lid van UMass Dartmouth, Team 1-33, Gurgel Spring 2022

UMASSD-GURGEL-S22S1G33

1 Lid

12 handleidingen geschreven

0 Opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 11

Afgelopen 30 dagen: 41

Altijd: 100