Repareer je spullen Gemeenschap Winkel

Sharper Image SVC430 Tripod Nut Replacement

Inleiding

The user will learn how to:

  • Remove the device from the case
  • Completely tear down the device
  • Locate the tripod nut
  • Remove the tripod nut

Wat je nodig hebt

  1. Sharper Image SVC430 Tripod Nut Replacement, Sharper Image SVC430 Disassembly: stap 1, afbeelding 1 van 2 Sharper Image SVC430 Tripod Nut Replacement, Sharper Image SVC430 Disassembly: stap 1, afbeelding 2 van 2

    • Power off your device before you begin.

    • Use your thumb to push down on the lever that says "open" while simultaneously pushing up the latch with your other thumb.

    Bewerken

  2. Sharper Image SVC430 Tripod Nut Replacement: stap 2, afbeelding 1 van 2 Sharper Image SVC430 Tripod Nut Replacement: stap 2, afbeelding 2 van 2

    • Once the latch is free, simply pull the front of the waterproof case off and slide the camera out.

    Bewerken

  3. Sharper Image SVC430 Tripod Nut Replacement: stap 3, afbeelding 1 van 3 Sharper Image SVC430 Tripod Nut Replacement: stap 3, afbeelding 2 van 3 Sharper Image SVC430 Tripod Nut Replacement: stap 3, afbeelding 3 van 3

    • Locate the bottom of the device.

    • Now, using the metal screwdriver, unscrew the screw on the bottom of the device.

    Bewerken

  4. Sharper Image SVC430 Tripod Nut Replacement: stap 4, afbeelding 1 van 2 Sharper Image SVC430 Tripod Nut Replacement: stap 4, afbeelding 2 van 2

    • This panel should come off easily, do not apply too much pressure.

    • Use the plastic opening tool to pry open the plastic panel from the top of the camera.

    • Locate the two screws on the top of the device.

    Bewerken

  6. Sharper Image SVC430 Tripod Nut Replacement: stap 5, afbeelding 1 van 1

    • Use the JIS J0 screwdriver to unscrew the two screws on the top of the device.

    Bewerken

  7. Sharper Image SVC430 Tripod Nut Replacement: stap 6, afbeelding 1 van 3 Sharper Image SVC430 Tripod Nut Replacement: stap 6, afbeelding 2 van 3 Sharper Image SVC430 Tripod Nut Replacement: stap 6, afbeelding 3 van 3

    • Use the plastic opening tool to pry off the back panel.

    • The back panel will come off easily.

    Bewerken

  8. Sharper Image SVC430 Tripod Nut Replacement: stap 7, afbeelding 1 van 1

    • Use the metal screwdriver to unscrew the screw from the back of the device.

    Bewerken

  9. Sharper Image SVC430 Tripod Nut Replacement: stap 8, afbeelding 1 van 1

    • Use the plastic opening tool to pry off the front panel of the device.

    Bewerken

  10. Sharper Image SVC430 Tripod Nut Replacement: stap 9, afbeelding 1 van 1

    • Using the screwdriver, unscrew the screw located underneath the front panel.

    Bewerken

  11. Sharper Image SVC430 Tripod Nut Replacement: stap 10, afbeelding 1 van 1

    • Be gentle with the device since there are wires attached to the front plate and two halves.

    • Gently pull both sides of the device to expose the interior of the device.

    Bewerken

  12. Sharper Image SVC430 Tripod Nut Replacement, Tripod Nut: stap 11, afbeelding 1 van 1

    • Locate the two screws that attach the tripod nut to the device.

    Bewerken

  13. Sharper Image SVC430 Tripod Nut Replacement: stap 12, afbeelding 1 van 2 Sharper Image SVC430 Tripod Nut Replacement: stap 12, afbeelding 2 van 2

    • Unscrew the two screws located on the back of the half that the tripod nut is located.

    • Once the screws are removed, the tripod nut can easily be removed.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 2

Afgelopen 30 dagen: 8

Altijd: 214