Inleiding

I am not responsible for anything in this article.

  1. Remove - Back,microSD,battery,sim
    • Remove - Back,microSD,battery,sim

    • Remove black rubber screw covers on back of display.

    • Remove 000 phillips screws (4) from top of display.

    Voeg opmerking toe

  2. Remove 3 small silver screws from battery area.
    • Remove 3 small silver screws from battery area.

    • Remove 2 Torx t-7's by MicroSD slot.

    • After screws are removed you can detach screen.

    Voeg opmerking toe

    • Remove 4 additional 000 phillips screws from display.

    • Using some heat,spudger,frce pry away the broken display from the frame.

    • Use extreme caution the actual display is very fragile.

    Voeg opmerking toe

    • Remove connector for digitizer

    • replace connector with new digitizer and rebuild.

    Voeg opmerking toe

    • Reconnect to main motherboard.

    Voeg opmerking toe

    • reassemble.

    • Enjoy the new display

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

jckoniecki

Lid sinds: 08-11-10

51 Reputatie

1 Handleiding geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 0

Altijd: 3,241