Inleiding

This part may need to be replaced if the speaker has been physically damaged or if it was exposed to water. When removing the speaker, be careful not to damage the nearby contacts as these are crucial to how the speaker amplifies sound.

Onderdelen

Geen onderdelen nodig.

  1. Begin by using a nylon spudger to pry off the back.
    • Begin by using a nylon spudger to pry off the back.

  2. Remove case around battery using a T5 screwdriver to remove four 5mm silver screws.
    • Remove case around battery using a T5 screwdriver to remove four 5mm silver screws.

    • Remove two 6mm T5 black screws.

    • Use the tweezers to remove the pink clips on either side of the device and then take the casing off.

    • On the back cover of battery casing, remove the speaker using the tweezers.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Allison Leal

Lid sinds: 24-10-18

387 Reputatie

4 handleidingen geschreven

Team

UMass Dartmouth, Team S3-G1, Peak Fall 2018 Lid van UMass Dartmouth, Team S3-G1, Peak Fall 2018

UMASSD-PEAK-F18S3G1

3 Leden

5 handleidingen geschreven

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 10

Altijd: 54