Shark Professional Steam Pocket Mop Water Tank Cap Replacement

Inleiding

Mineral buildup can occur when the water tank cap is not loosened before storing or if the tank is not drained. In these situations the cap can become stuck inside the tank. When this occurs, the cap is often lost or misplaced, which leads to a replacement.

Stap 1 Water Tank Cap

Shark Professional Steam Pocket Mop Water Tank Cap Replacement, Water Tank Cap: stap 1, afbeelding 1 van 2

Shark Professional Steam Pocket Mop Water Tank Cap Replacement, Water Tank Cap: stap 1, afbeelding 2 van 2

Turn off the Steam Pocket Mop and unplug it from the wall.
Be sure that the water in the water tank cools to room temperature before proceeding.

Vertaal

Stap 2

Shark Professional Steam Pocket Mop Water Tank Cap Replacement: stap 2, afbeelding 3 van 3

Remove the water tank cap from the water tank reservoir.
Turn the cap towards the upward position.
Rotate counter-clockwise until it loosens.
When reassembling, align the grooves of new water tank cap with the opening of water tank reservoir and then push in.

Vertaal

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Auteur

met 3 andere bijdragers

Tyler Wicke

Lid sinds: 10/17/18

237 Reputatie

2 handleidingen geschreven

Medailles: 6

+3 andere badges

Team

UW Tacoma, Team S1-G3, Rose Fall 2018 Lid van UW Tacoma, Team S1-G3, Rose Fall 2018

UWT-ROSE-F18S1G3

4 Leden

10 handleidingen geschreven

12 opmerkingen

Need a water cap for S3901 N3 11 Shark steam mop. They said they discontinued and I have ordered two online and neither will work. And I really going to have to buy a new one?

shannon poole - 9 feb. 2019 Antwoord