Repareer je spullen Gemeenschap Winkel

Shark Professional Steam Pocket Mop Head Replacement

Inleiding

If you need to replace or re-install the mop head of your Steam Pocket Mop, this guide will walk you through the process. There are no tools needed.

  1. Shark Professional Steam Pocket Mop Head Replacement, Mop Head: stap 1, afbeelding 1 van 2 Shark Professional Steam Pocket Mop Head Replacement, Mop Head: stap 1, afbeelding 2 van 2

    • Turn off the Steam Pocket Mop and unplug it from the wall.

    • Be sure that any water in the water tank cools before proceeding.

    Vertaal

  3. Shark Professional Steam Pocket Mop Head Replacement: stap 2, afbeelding 1 van 3 Shark Professional Steam Pocket Mop Head Replacement: stap 2, afbeelding 2 van 3 Shark Professional Steam Pocket Mop Head Replacement: stap 2, afbeelding 3 van 3

    • Push down on the round, grey release button near the connection point, while pulling the mop head out.

    • The mop head should slide out and detach.

    • When reassembling, you should hear it click into place if it is properly installed.

    Vertaal
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 3 andere bijdragers

Tyler Wicke

Lid sinds: 10/17/18

237 Reputatie

2 handleidingen geschreven

Medailles: 6

+3 andere badges

Team

UW Tacoma, Team S1-G3, Rose Fall 2018 Lid van UW Tacoma, Team S1-G3, Rose Fall 2018

UWT-ROSE-F18S1G3

4 Leden

10 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 7

Afgelopen 30 dagen: 35

Altijd: 1,849