Repareer je spullen Gemeenschap Winkel

Shark Navigator Lift-Away Zero-M Power Switch Replacement

Inleiding

Use this guide to replace a broken or malfunctioning power switch in the Shark Navigator Lift-Away Zero-M. The power button is housed in the handle of the vacuum, and is connected to a mother board that will have to be resoldered to the new power switch.

Make sure that the vacuum is unplugged during the replacement of the switch.

You will need to know how to solder for this replacement, here is a guide on how to solder.

Wat je nodig hebt

  1. Shark Navigator Lift-Away Zero-M Power Switch Replacement, Power Switch: stap 1, afbeelding 1 van 2 Shark Navigator Lift-Away Zero-M Power Switch Replacement, Power Switch: stap 1, afbeelding 2 van 2

    • Depress the dust cup release button and remove the dust cup.

    Vertaal

  2. Shark Navigator Lift-Away Zero-M Power Switch Replacement: stap 2, afbeelding 1 van 2 Shark Navigator Lift-Away Zero-M Power Switch Replacement: stap 2, afbeelding 2 van 2

    • Use a Torx TR6 screwdriver to remove the seven 18 mm screws from the frame of the vacuum.

    Vertaal

  4. Shark Navigator Lift-Away Zero-M Power Switch Replacement: stap 3, afbeelding 1 van 2 Shark Navigator Lift-Away Zero-M Power Switch Replacement: stap 3, afbeelding 2 van 2

    • Grab the front of the vacuum frame and lift the wand assembly to remove it.

    • This will reveal the underside of the switch.

    Vertaal

  5. Shark Navigator Lift-Away Zero-M Power Switch Replacement: stap 4, afbeelding 1 van 2 Shark Navigator Lift-Away Zero-M Power Switch Replacement: stap 4, afbeelding 2 van 2

    • Use tweezers or your fingers to disconnect the power switch connectors.

    • Each of the wires has a release tab at the bottom of the metal portion. Be sure to depress it before pulling to avoid damage.

    Vertaal

  6. Shark Navigator Lift-Away Zero-M Power Switch Replacement: stap 5, afbeelding 1 van 3 Shark Navigator Lift-Away Zero-M Power Switch Replacement: stap 5, afbeelding 2 van 3 Shark Navigator Lift-Away Zero-M Power Switch Replacement: stap 5, afbeelding 3 van 3

    • Push the switch out of its housing from the underside.

    • Remove the switch.

    Vertaal
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 2 andere bijdragers

Chris Collins

Lid sinds: 02/05/24

121 Reputatie

1 Handleiding geschreven

Medailles: 3

Team

University of North Texas, Team 3-4, Kilpatrick Spring 2024 Lid van University of North Texas, Team 3-4, Kilpatrick Spring 2024

UNT-KILPATRICK-S24S3G4

4 Leden

5 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 4

Afgelopen 30 dagen: 16

Altijd: 72