Repareer je spullen Gemeenschap Winkel

Shark Navigator HEPA Filter Replacement

Inleiding

When cleaning the HEPA filter does not improve your vacuum's suction, it is time to replace it.

  1. Shark Navigator HEPA Filter Replacement, HEPA Filter: stap 1, afbeelding 1 van 1

    • On the front of the vacuum, locate the latch on the bottom of the front vent.

    Vertaal

  3. Shark Navigator HEPA Filter Replacement: stap 2, afbeelding 1 van 1

    • Press up on the latch and remove the front vent

    Vertaal

  4. Shark Navigator HEPA Filter Replacement: stap 3, afbeelding 1 van 1

    • Lift the HEPA filter out of the vacuum

    Vertaal
Conclusie

To reassemble your device, follow these instructions in reverse order.

3 andere personen hebben deze handleiding voltooid.

Auteur

met 1 andere bijdrager

Heather Shanks

Lid sinds: 03/25/15

259 Reputatie

1 Handleiding geschreven

Medailles: 11

+8 andere badges

Team

UMass Dartmouth, Team 5-4, Kish Spring 2015 Lid van UMass Dartmouth, Team 5-4, Kish Spring 2015

UMASSD-KISH-S15S5G4

4 Leden

16 handleidingen geschreven

2 opmerkingen

the taking out worked great but putting the new one back in is impossible.......will not fit i will not buy a new vac because of this........

lillian kresge - Antwoord

this is the second filter that i have purchased and it is the same...does not fit properly i could use a hammer to it?????

lillian kresge - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 14

Afgelopen 30 dagen: 66

Altijd: 12,009