Repareer je spullen Gemeenschap Winkel

Shark IQ AV993 Roller Brush Replacement

Inleiding

This is the replacement guide for the Shark IQ AV993 roller brush. This replacement is very simple and easy to complete, there are no required previous knowledge of the device needed to complete this guide. There are no hazards to be on the lookout for. Just be very gentle and carful when taking out parts and moving things around. This replacement might be needed if your roller brush is clogged or worn down to the point where it is no use.

  1. Shark IQ AV993 Roller Brush Replacement, Roller Brush: stap 1, afbeelding 1 van 1

    • Remove the dust bin from the device by pressing down on the release button and pulling out the tray.

    Bewerken

  3. Shark IQ AV993 Roller Brush Replacement: stap 2, afbeelding 1 van 1

    • Turn the device over so the bottom is facing upwards.

    • Press on the release tabs located on the roller brush cover.

    • Remove the cover from the device.

    Bewerken

  4. Shark IQ AV993 Roller Brush Replacement: stap 3, afbeelding 1 van 1

    • Use your hands to lift the roller brush out of the device.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 2 andere bijdragers

Cole Travers

Lid sinds: 10/26/22

150 Reputatie

1 Handleiding geschreven

Medailles: 4

+1 extra badge

Team

UMass Dartmouth, Team 3-3, Botvin Fall 2022 Lid van UMass Dartmouth, Team 3-3, Botvin Fall 2022

UMASSD-BOTVIN-F22S3G3

3 Leden

6 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 3

Afgelopen 30 dagen: 9

Altijd: 137