Ga door naar hoofdinhoud

Sanyo VPC-T850 LCD Display Replacement

Gearchiveerde handleiding
Deze handleiding wordt enkel nog bijgehouden voor historische doeleinden. Gebruik de laatste versie van deze gids om uw reparatie uit te voeren.

Wat je nodig hebt

  1. Sanyo VPC-T850 LCD Display Replacement, Disconnect the Ribbon: stap 1, afbeelding 1 van 2 Sanyo VPC-T850 LCD Display Replacement, Disconnect the Ribbon: stap 1, afbeelding 2 van 2
    • Use caution not to damage ribbon when disconnecting.

    • The yellow ribbon is attached to the right side of the screen and goes to a black connector piece.

    • Gently flip the black connector away from the LCD screen to unlock the yellow ribbon.

    • Carefully pull the yellow ribbon towards the LCD screen to disconnect it.

  2. Sanyo VPC-T850 LCD Display Replacement, Remove LCD Screen: stap 2, afbeelding 1 van 1
    • The LCD screen should now be disconnected from the rest of the camera and a pry tool can be used to lift it out of its casing.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Jonathan Yau

Lid sinds: 04/11/10

26 Reputatie

4 handleidingen geschreven

Team

Cal Poly, Team 27-95, Amido Spring 2010 Lid van Cal Poly, Team 27-95, Amido Spring 2010

CPSU-AMIDO-S10S27G95

4 Leden

4 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 2

Altijd: 3,513