Sansa e250 Screen Replacement

Geschreven door: Jarrod (en 6 andere bijdragers)

Reacties: 1
Favorieten: 1
Voltooide reparaties: 1

Moeilijkheid

Gemiddeld

Stappen

Tijd vereist

15 minuten

Inleiding

This guide needs additional details to complete the procedure. The LCD screen is affixed to the motherboard and cannot be replaced without specialized tools.

Gereedschap

Koop deze gereedschappen

Phillips #00 Screwdriver

US$ 6,99

Koop
Spudger

US$ 2,99

Koop

Onderdelen

Geen onderdelen opgegeven.

Stap 1 Sansa e250

Use a #0 Phillips head screwdriver to remove the four small black screws from the back of the device.

Use a #0 Phillips head screwdriver to remove the four small black screws from the back of the device.
To ensure you don't lose any tiny parts during the replacement process, place parts on the white magnetic sheet.
Once the screws have been removed, proceed to take off back cover.

Bewerken

Stap 2

Now, proceed to lift the battery out and remove it.

Now, proceed to lift the battery out and remove it.

Bewerken

Stap 3

Use a #0 Phillips screwdriver to remove the four small silver screws from the outside corners of the battery housing.

Use a #0 Phillips screwdriver to remove the four small silver screws from the outside corners of the battery housing.

Bewerken

Stap 4

Now gently pry the front cover off. A Black Spudger can be used to assist in the removal of the cover.

Now gently pry the front cover off. A Black Spudger can be used to assist in the removal of the cover.

Bewerken

Stap 5

Gently separate the mainboard from the battery housing. This may be difficult around the headphone jack. Use a spudger if necessary.

Pull the motherboard out and down away from the top of the phone.

Gently separate the mainboard from the battery housing. This may be difficult around the headphone jack. Use a spudger if necessary.
Pull the motherboard out and down away from the top of the phone.

Bewerken

Stap 6 Screen

Unsnap the screen clips from the motherboard

Unsnap the screen clips from the motherboard

Bewerken

Stap 7

This is as far as you can go without specialized board rework equipment. Trying to forcibly remove the screen will destroy it, but you can gently move it aside for cleaning or access to other board components.

This is as far as you can go without specialized board rework equipment. Trying to forcibly remove the screen will destroy it, but you can gently move it aside for cleaning or access to other board components.

Bewerken