Onderdelen

Geen onderdelen nodig.

  1. Use a #0 Phillips head screwdriver to remove the four small black screws from the back of the device.
    • Use a #0 Phillips head screwdriver to remove the four small black screws from the back of the device.

    • To ensure you don't lose any tiny parts during the replacement process, place parts on the white magnetic sheet.

    • Once the screws have been removed, proceed to take off back cover.

  2. Now, proceed to lift the battery out and remove it.
    • Now, proceed to lift the battery out and remove it.

  3. Use a #0 Phillips screwdriver to remove the four small silver screws from the outside corners of the battery housing. Use a #0 Phillips screwdriver to remove the four small silver screws from the outside corners of the battery housing.
    • Use a #0 Phillips screwdriver to remove the four small silver screws from the outside corners of the battery housing.

  4. Gratis verzending van alle bestellingen van meer dan US$ 100 of met een Pro Tech Toolkit!

    Doorblader onze winkel
  5. Now gently pry the front cover off. A Black Spudger can be used to assist in the removal of the cover. Now gently pry the front cover off. A Black Spudger can be used to assist in the removal of the cover.
    • Now gently pry the front cover off. A Black Spudger can be used to assist in the removal of the cover.

  6. Gently separate the mainboard from the battery housing. This may be difficult around the headphone jack. Use a spudger if necessary. Pull the motherboard out and down away from the top of the phone.
    • Gently separate the mainboard from the battery housing. This may be difficult around the headphone jack. Use a spudger if necessary.

    • Pull the motherboard out and down away from the top of the phone.

  7. Peel off the small foam rectangle on the back of the mainboard and set to the side.
    • Peel off the small foam rectangle on the back of the mainboard and set to the side.

    • Peel off the black tape and set off to the side.

  8. Gently pry up the memory chip and replace it with the new one.
    • Gently pry up the memory chip and replace it with the new one.

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Lauren

Lid sinds: 13-02-14

43 Reputatie

2 handleidingen geschreven

Team

Ohio State, Team 1-4, Buehl Spring 2014 Lid van Ohio State, Team 1-4, Buehl Spring 2014

OSU-BUEHL-S14S1G4

3 Leden

3 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 1

Afgelopen 30 Dagen: 7

Altijd: 603