Repareer je spullen Gemeenschap Winkel

Sanitaire SC684 Roller Brusher and Drive Belt Replacement

Inleiding

This guide will teach you how to replace the roller brush and driver belt from your Sanitaire SC684 vacuum cleaner. Sanitaire recommends replacing the roller brush once a year and the belt every six months, to ensure that your vacuum will continue to work optimally.This is a relatively simple procedure that does not require any special skills or tools. These two components are connected, allowing them to be removed at the same time. Reassembly is the same process as removal, reversing the steps.

  1. Sanitaire SC684 Roller Brusher and Drive Belt Replacement, Roller Brush and Belt: stap 1, afbeelding 1 van 1

    • Be sure to unplug the vacuum cleaner before disassembling to prevent electric shock.

    • Lay the vacuum on its back.

    Vertaal

  2. Sanitaire SC684 Roller Brusher and Drive Belt Replacement: stap 2, afbeelding 1 van 1

    • Find the metal plate (located directly in the center).

    • Locate the two latches on either side of the metal plate.

    • Detach the latches by pulling them away from metal plate.

    Vertaal

  3. Sanitaire SC684 Roller Brusher and Drive Belt Replacement: stap 3, afbeelding 1 van 1

    • Remove the metal plate by pulling it towards you.

    Vertaal

  4. Sanitaire SC684 Roller Brusher and Drive Belt Replacement: stap 4, afbeelding 1 van 1

    • Identify the belt and brush roller.

    • The belt is a black ring made of rubber.

    • The brush roller is the long metal tube with bristles attached to it.

    Vertaal

  5. Sanitaire SC684 Roller Brusher and Drive Belt Replacement: stap 5, afbeelding 1 van 1

    • Remove the belt from the circular knob by inserting your fingers on either side, gently lifting towards you.

    Vertaal

  6. Sanitaire SC684 Roller Brusher and Drive Belt Replacement: stap 6, afbeelding 1 van 2 Sanitaire SC684 Roller Brusher and Drive Belt Replacement: stap 6, afbeelding 2 van 2

    • Pull brush roller out and slip the belt off from the indent in the middle of the roller.

    Vertaal
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 10 andere bijdragers

Caycie Pascual

Lid sinds: 09/26/12

1 Reputatie

4 handleidingen geschreven

Medailles: 2

Team

Cal Poly, Team 16-58, Forte Fall 2012 Lid van Cal Poly, Team 16-58, Forte Fall 2012

CPSU-FORTE-F12S16G58

5 Leden

8 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 6

Afgelopen 30 dagen: 17

Altijd: 2,798